LATICRETE® 335 MAXI MULTIPURPOSE LEFT ADHESIVE
A highly polymer modified and highly flexible adhesive for installation of large format/ slim tiles on most of the substrates to accommodate movements. It offers very good handling properties with good sag and slump resistance while doing installation on wall or floor respectively. It can be applied up to 18 mm bed thickness.
Applications
Designed especially for interior and exterior floor and wall installations of all types of ceramic tile, vitreous, semi-vitreous tile, paper faced glass mosaic tiles, precast terrazzo and natural stones over concrete and on a variety of substrates. Good underwater shear bond allows this product to be used for wet areas like swimming pools, sauna, water bodies and washrooms. Can be used for tile on tile applications and as slurry bond adhesive in wet on wet applications.
Advantages
- For fixing extra large format tiles & thin body tiles on demanding internal & external applications
- Highly Flexible, Light weight formula. More than 15% higher coverage than standard adhesive
- Cream & non sag formula for easier installation on floor and wall
- Non-slump adhesive with a bed thickness up to 18 mm
Suitable Substrates
- Slim porcelain large format tiles
- Vitreous, semi vitreous or non- vitreous tiles; ceramic; quarry, cement body tile
- Brick
- Cement based precast terrazzo
- Natural stone tile
Coverage
Approx 72 – 78 sft per 25 kg bag with (6mmx6mm) square notch trowel for a bed of 3 mm
Bed Thickness
Can be used upto 18 mm
Packaging
25 kg bags
Colour
Grey
Compliance
Meets the following standards
- ANSI A118.4 ET
- EN 12004 / ISO 13007 : C2TE S1
- IS 15477: 2019: TYPE 3 TS1 ADHESIVE
- VOC: Practically Nil
MYK LATICRETE PUA 212TM
It is a two component, modified Polyurethane Adhesive designed for the installation of ceramic tile, vitrified tile, metal tile, glass tile, agglomerates, glass mosaic tile and natural stone on any substrate. It is highly elastic, thixotropic and suitable to lay water sensitive tiles & stones on highly expandable, deformable, absorbent and non-absorbent substrates.
Applications
Designed especially for interior and exterior floor and wall installations of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, precast terrazzo, engineered stone, metal tiles and natural stones over concrete and on a variety of substrates including metal substrates and drywall boards.
Advantages
- Highly flexible & superior bond strength
- Suitable for all the substrates including metal
- Good for vertical applications
- Ideal for agglomerates & moisture sensitive tiles / stones
Suitable Substrates
- Concrete – VDF, Tremix and MIVON
- Concrete masonry & brick masonry
- Cement mortar beds & plaster
- Metal floors and walls
- Tile and stone
- Wood & Plywood*
- Cement backer board* & Gypsum board*
- Cement terrazzo
- Engineered stones & marbles
- Epoxy or PU resin based substrates
- Rubber, PVC and Linoleum substrates
*Consult the backer board manufacturer’s data sheet for the specific recommendations and load bearing capacity of specific board intended for use.
Coverage
15 to 17 sq.ft per pack of 8 kg with 1/4″ x 1/4″ (6mm x 6mm) square notch trowel for a bed of 3mm.
Coverage will vary depending on trowel notch size, type and size of tile and substrate smoothness and evenness.
Packaging
8 kg Pail (Part A: 1.6 kg Part B: 6.4 kg) & 4 kg Pail (Part A: 800 g Part B: 3.2 kg) Factory proportioned unit consisting of two conveniently packed components – Hardener, Resin (Part A and Part B)
Colour
Off White
Compliance
Meets the following standards
- EN: 12004 / ISO 13007 : R2T
- IS 15477 : 2019 : TYPE 5 T
- VOC: Very Low
SP-100TM Stainfree Grout for Floor N' Wall
SP-100TM Stainfree Grout for Floor N’ Wall is a stainfree, colour-fast, chemical resistant, 100% solid epoxy grout suitable for ceramic tiles, vitrified tiles, marble and stone, especially in stain prone areas such as kitchens and washrooms (residential and commercial installations).
Applications
Kitchens, bathrooms, swimming pools, fountains, water bodies, hospitals, operation theatres, sterilization rooms, restaurants, cafeterias, light industrial applications and high traffic areas. It is NOT a waterproof material for joints or surfaces.
Advantages
- 100% stainfree
- Strong and durable
- Chemical and temperature resistant
- Anti bacterial and anti fungal
Coverage
Varies with tile size and grout width
Packaging
1/5th unit -1 kg & 1 unit – 5 kg pails
Factory proportioned unit consisting of three conveniently packed components – Hardener, Resin (Part A and Part B) and Coloured Filler Powder (Part C).
Colour
Available in a range of more than 40 colours
Compliance
Meets the following standards
- ANSI: A 118.3
- EN 13888: RG2
- VOC: Very low
Architectural Drawing for Facade System
Architectural Drawing For Swimming Pool System
Architectural Drawing for Commercial Flooring System
Architectural Drawings for Drywall Tiling System
