Dispensers

tesa® 6005

Place the tesa® 6005 dispenser on the carton and pull it towards yourself. The tape is unwound and pressed down by the 2 rubber contact rollers.To cut the tape, press the trigger and continue moving the dispenser. Threading: The tesa® roll is put on the tape wheel such that the adhesive side of the tape faces the handle. Open the return stop and fix it at the trigger. Pull the tape between tape guide roller and return stop. The return stop closes again by pressing the trigger – the tesa® 6005 hand dispenser is ready for use.

  • Core diameter – 3 inch
  • Length – 220 mm
  • Width – 45 mm
  • Height – 210 mm
  • Weight – 530 g
  • Max. roll diameter – 170 mm
  • Type of applicator – hand
  • Max. roll width – 25 mm

tesa® 6009

The tesa® 6009 dispenser is designed for sealing light cartons and dispending masking tape. It is also used in drawing offices and graphic design studios. The big advantages of the tesa® 6009 dispenser are the flexibility in use, the space-saving size and the possibility of fastening the dispenser without tools.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – multifunctional
  • Length – 180 mm
  • Width – 85 mm
  • Height – 230 mm
  • Mode of drive – manual
  • Weight – 340 g
  • Max. roll diameter – 210 mm
  • Type of applicator – table
  • Max. roll width – 50 mm

tesa® 6012

The dispenser can be fastened securely with the supplied clamp or with screws on the packing table (four screw holes are prepared). The tape is pulled off and cut along the serrated blade.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – packaging
  • Length – 175 mm
  • Width – 67 mm
  • Height – 130 mm
  • Mode of drive – manual
  • Weight – 610 g
  • Max. roll diameter – 145 mm
  • Type of applicator – table
  • Max. roll width – 50 mm

tesa® 6032

When using tesa® strapping tapes for securing pallets, press down the brake plate to ensure the tape is unwound at the required tension.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – transport securing
  • Length – 220 mm
  • Width – 45 mm
  • Height – 80 mm
  • Mode of drive – manual
  • Weight – 335 g
  • Max. roll diameter – 150 mm
  • Type of applicator – hand
  • Max. roll width – 25 mm

tesa® 6056

The desired strip length is set on the measuring scale on the left-hand side of the dispenser in a range from 30 to 150 mm. The tesa® tape is unrolled by hand until the measuring roller prevents further tape to be dispensed. By pulling the tape gently downwards, the electromagnetic cross cutter is trigged via a microswitch. The desired strip is automatically cut for use. A single movement of the hand is, therefore, sufficient for unrolling, cutting and removing a tesa® strip of predetermined length. For strip longer than 150 mm, the measuring roller is switched to continuous operation. The tesa® automatic dispenser 6056 is equipped with a control unit to adjust the impact force of the electromagnetic cutter. Set a lower impact force for tapes which are easy to cut, such as filmic tapes of smaller widths, to minimize impact noise and dispenser strain.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – multifunctional
  • Length – 340 mm
  • Width – 150 mm
  • Height – 133 mm
  • Mode of drive – automatic
  • Weight – 5500 g
  • Max. roll diameter – 180 mm
  • Type of applicator – table
  • Max. roll width – 50 mm
  • Length presetting up to – 30-150 mm
  • Connections – 230 V / 50 Hz
  • Power supply – 10 watt

tesa® 6068

Release the roller lock lever and put the tesa® tape into the adjustable tape holder. Feed the tape by using the FORWARD button and fix it afterwards with the hold down roller unit and the tape holder. The desired tape length is set by the SET A- and SET B- button in a range from 5 to 999 mm. The desired number of pieces is set by the SELECT button. Press the START button to deliver the tape.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – multifunctional
  • Length – 213 mm
  • Width – 116 mm
  • Height – 140 mm
  • Mode of drive – automatic
  • Weight – 2500 g
  • Max. roll diameter – 300 mm
  • Type of applicator – machine
  • Max. roll width – 6-60 mm
  • Feeding speed – 200 m/min
  • Length presetting up to – 5-999 mm
  • Connections – 100-240V
  • Power supply – 25 watt

tesa® 6075

Put the tesa® 6075 dispenser on the carton and pull it towards yourself. The tape is unwound and pressed down by two rubber contact rollers. To cut the tape, press the trigger and continue moving the dispenser. Threading: The tesa® roll is put on the tape wheel such that the adhesive side of the tape faces the handle. Open the return stop and fix it at the trigger. Pull the tape between tape guide roller and return stop. The return stop closes again by pressing the trigger – the tesa® 6075 hand dispenser is ready for use.

  • Core diameter – 3 inch
  • Length – 210 mm
  • Width – 90 mm
  • Height – 210 mm
  • Weight – 690 g
  • Max. roll diameter – 300 mm
  • Type of applicator – machine
  • Max. roll width – 6-60 mm

tesa® 6256

The tape is placed with the adhesive side up. The twisted neck of the bag is pulled down through the slot of the unit and thus closed by a tab seal securely taped to the bag neck.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – packaging
  • Length – 185 mm
  • Width – 70 mm
  • Height – 270 mm
  • Mode of drive – manual
  • Weight – 610 g
  • Max. roll diameter – 130 mm
  • Type of applicator – table
  • Max. roll width – 12 mm

tesa® 6300

Place the dispenser on the carton and pull it towards yourself. The rubber contact roller presses the tape down firmly as it is applied from the roll. The tape is cut by the serrated blade by tilting the dispenser. The cut end of the tape is pressed to the carton by the flexible application plate. Threading: The tesa® roll is put on the tape wheel such that the adhesive side of the tape faces the handle. Pull the end of the tape between the tape guide roller and the metal plate until the tape is free of wrinkles.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – packaging
  • Length – 150 mm
  • Width – 65 mm
  • Height – 240 mm
  • Mode of drive – manual
  • Weight – 350 g
  • Max. roll diameter – 120 mm
  • Type of applicator – hand
  • Max. roll width – 50 mm

tesa® 6400

Place the tesa 6400 dispenser on the carton and pull it towards yourself. The tape is unwound and pressed down by the contact roller. To cut the tape, press the plastic flap on the carton and continue moving the dispenser. Threading: The tesa roll is put on the tape wheel such that the adhesive side of the tape faces the handle. Pull the end of the tape between the tape contact roller and the metal loading gate until the tape is free of wrinkles.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – packaging
  • Length – 220 mm
  • Width – 60 mm
  • Height – 220 mm
  • Mode of drive – manual
  • Weight – 500 g
  • Max. roll diameter – 140 mm
  • Type of applicator – hand
  • Max. roll width – 50 mm

tesa® 56402

Put the tesa 56402 dispenser on the carton and pull it towards yourself. The tape is unwound and pressed down by the 2 rubber contact rollers. To cut the tape, press the trigger and continue moving the dispenser. Threading: The tesa roll is put on the tape wheel such that the adhesive side of the tape faces the handle. Pull the end of the tape between the tape guide roller and the return stop plate until the tape is free of wrinkles.

  • Core diameter – 3 inch
  • Type of tape – single-sided
  • Application purpose – packaging
  • Length – 205 mm
  • Width – 65 mm
  • Height – 205 mm
  • Mode of drive – manual
  • Weight – 665 g
  • Max. roll diameter – 170 mm
  • Type of applicator – hand
  • Max. roll width – 50 mm